To color match the Lapitec Ebano Slab
StrongBond is a new generation bi-component glue for gluing Lapitec. It has zero yellowing and is UV stable to the sun.The StrongBond Ebano comes in a 215 ml cartridge for fast and easy dispensing and use.
Solvent free, with medium reactivity. It has a good hardness and can cure at 32°F. The glue hardened is bright also when the level of humidity is high and the temperature is low.
Requires use of special M200XMR Cartridge Gun.
All surfaces must be cleaned and free of dust and grease. When applying to a polished or glossy surface it is advised to scrub the surface with sandpaper before gluing. Remove cap and attach the special threaded mixing nozzle. Squeeze out about 6" of product before applying to surface. Clean the nozzle after use, replace the cap and discard the mixing nozzle. Repeat this process at any change of mixer. Product will not set below 32°.
The product in the cartridge will last at least 6 months if stored between 65° and 77°. Keep away from sunlight, heat and humidity.
Please read the safety data sheet before use and follow the product instructions.