This outdoor glue cartridge is specially designed for use with the DEKTON® Bento surfaces. It also offers very high adhesion and is color matched. The pre-dosed 215 ML cartridge is designed for easy dispensing.
This Mastidek cartridge glue for the DEKTON® Bento is a new generation bi-component resin used to glue DEKTON® Bento surfaces. DEKTON® Mastidek Fast Outdoor Cartridge glue has a very high adhesion in a short amount of time; allowing for cutting and polishing of the assembled parts in a short time. Namely, about 45-60 minutes. Once the glue has hardened it is very shiny and is very polishable.
Mastidek outddor cartridge glue for DEKTON® Bento is produced in special cartridges with a 2:1 bi-axial quantity of 215 ML. The glue and hardener are pre-dosed inside the cartridge. That means once it is inserted in the proper gun with the special mixer fixed on top, it allows the correct extrusion and mixing of the parts. Mastidek Fast Outdoor requires the use of the special M200XMR Cartridge Glue Gun.
To use the 215 ML Mastidek Fast Outdoor adhesive cartridge for DEKTON® Bento, simply follow these important steps and guidelines:
The product in the cartridge will last at least 12 months if stored between 65° and 77°. Keep away from sunlight, heat and humidity.
Please read the safety data sheet before use and follow the product instructions.
Technical information for the Mastidek Cartridge is available below. For a printable version of the technical information (including the data below) follow the "Printable Tech Sheet" link below the table.